Marotta U.K. image of the earth and colour swirls.

Link to About Marotta U.K. page Link to About Marotta U.K. page
Link to Marotta U.K. News page Link to Marotta U.K. News page
Link to Marotta U.K. Products page Link to Marotta U.K. Products page
Link to Marotta U.K. Capabilities page Link to Marotta U.K. Capabilities page
Link to Marotta U.K. Links page Link to Marotta U.K. Links page
Link to Contact Marotta U.K. page Link to Contact Marotta U.K. page
Link to Marotta U.K. Home page Link to Marotta U.K. Home page

 

Marotta U.K., part of the Marotta Group, logo. Link to main introductory page.

Home > Products > Solenoid Valves > High Pressure Solenoid Valve


Products: Solenoid Valves
High Pressure Solenoid Valve. Model No. SVS03

 

Image of a High Pressure Solenoid Valve. Model No. SVS03Product Overview:
A flow control valve designed for the control of high pressure gaseous propellants.

The design comprises of two essentially identical, solenoid operated, normally closed, poppet type valves mounted coaxially in series. Each of these solenoid valves comprises a coil, fixed pole and a suspended moving/armature, to which is attached a sealing pin, the valve seat is located in the valve outlet. The poppet/seat interface has been designed to minimise flow discontinuities and therefore reduce susceptibility to contamination induced failures.

This valve is an adaptation of the successful SV06/SV14 series of valves modified for high pressure use by the introduction of the “pin-in-hole” sealing arrangement and the use of electron beam welds in a stronger body.

Performance Characteristics:

Operating Media Xe, GN2
Operational Temperature -10°C to 50°C
Operating Pressure 120 bar
External Leakage < 1 x 10-6 scc/s GHe
Internal Leakage < 1 x 10-4 scc/s GHe
Cycle Life 200,000
Open/Close Response < 10 ms required (< 5 ms typical)
Coil Resistance 41 Ω
Operating Voltage 28 Vdc
Mass < 110 g
Materials Radiometal, Stainless Steel, Vespel
Electrical Interface Flying leads
Fluid Interface 1/8 x 37° Coupling*
* Other options are available

Image of a High Pressure Solenoid Valve. Model No. SVS03

 

Diagram of a High Pressure Solenoid Valve. Model No. SVS03

Product History:
This valve is due to be flown on the Chinasat DMC+4 spacecraft.

 

Open Data Sheet in Adobe Acrobat format

SV06/SVS02 Cold Gas Thruster ¦ SV14 Cold Gas Thruster ¦ LAE Flow Control Valves ¦ Dual In-Line Flow Control Valve ¦ High Pressure Latch Valve ¦ ¦ Monopropellant Latching Valve ¦ Single Flow Latch Valve

 
 

All Products ¦ Non-Return Valves/Check Valves ¦ Fill and Drain/Vent Valves ¦ MicroNewton Proportional Thrusters ¦ Xenon Flow Controllers ¦ Flow Control Valves ¦ Cold Gas Thrusters ¦ Thermal Flow Controllers ¦ Storage Tanks ¦ Latch Valves

About Marotta U.K. ¦ News ¦ Products ¦ Capabilities ¦ Links ¦ Contact Us ¦ Home